Product Classification:Mechanical Press

Closed four-point mechanical press

Brief introduction:The whole machine adopts modular design, advanced structure; it has high rigidity, high precision and good precision stability. The main drive drive control technology is advanced, safe and reliable.

Key words:closed four-point mechanical press

Request now Contact us

Product details

Technical features:

Modular design of the whole machine, advanced design;
It has high rigidity, high precision and good precision stability;
The main drive drive control technology is advanced, safe and reliable;
the main structural elements are treated to eliminate internal stresses by artificial curing;
heavy duty light oil lubrication system;
intelligent human-machine interaction interface;
PLC and remote network control technologies.

Technical parameters:

Name	Unit of measurement	JH39-500	JH39-630	JH39-800	JH39-1000	JH39-1250	JH39-1600	JH39-2000
Nominal force	kN	5000	6300	8000	10000	12500	16000	20000
Stroke with nominal force	mm	13	13	13	13	13	13	13
Spline stroke length	spm	600-700	700/800/900	800/900/1000	800/900/1000	800/900/1000	800/900/1000	800/900/1000
Spline stroke frequency	spm	8-18	8-18	8-18	8-18	8-18	8-18	8-18
Maximum matrix installation height	mm	1200	1200	1300	1400	1400	1500	1500
Adjustable matrix installation height range	mm	500	500	500	600	600	700	700
Working area size (left-right × front-back)	mm	3800×2000	4000×2000	4200×2000	4500×2200	4500×2200	4500×2500	4600×2600
Desktop size (left-right × front-back)	mm	3800×2000	4000×2000	4200×2000	4500×2200	4500×2200	4500×2500	4600×2600
Desktop type	kN	Left-to-right movement/T-type	Left-to-right movement/T-type	Left-to-right movement/T-type	Left-to-right movement/T-type	Left-to-right movement/T-type	Left-to-right movement/T-type	Left-to-right movement/T-type
Air spring force	kN	0-1000	0-1200	0-1500	0-2000	0-2500	0-3000	0-4000
Number of top curtains	pcs.	1	1	1	1	1	1	1
Air cushion travel	mm	0-200	0-250	0-250	0-250	0-250	0-350	0-350
Main motor power	kW	75	90	132	160	200	315	400
Height of the press above the ground	mm	8600	8800	9300	9600	10200	10500	10800
Depth of the underground part of the press	mm	5500	6000	6000	6500	6500	7000	7000
External dimensions of the press (left-right × front-back)	mm	5500×5200	5800×5400	6100×5600	6500×5900	6700×6100	6900×6300	7100×7000

Development of special equipment individually in accordance with the user's technological requirements.

Products

Hydraulic Press
Mechanical Press
Hydraulic presses and press accessories

Label:

Closed four-point mechanical press

Current Language

Change Language

Closed four-point mechanical press

Technical features:

Technical parameters:

Application areas

This hydraulic press adopts the technologies of servo proportional hydraulic control, low speed with anti-rolling system, electro-hydraulic automatic protection against offset loads, software for high-speed...

Product Details The production line adopts servo control system, featuring high productivity, high efficiency, energy efficiency and environmental protection, and low noise. The productivity of the whole line can reach 1000...

Product details： The main body of this series of products can move along the length of the long worktable. The worktable is equipped with devices for lifting and turning the products, and the straightening support can move. According to the ...

Product details: High speed servo controlled hydraulic press production line adopts electro-hydraulic proportional servo control technology, dynamic loading technology, balance technology, and high speed hydraulic press...

Product details: This series products adopt frame or four-column structure, and can be equipped with oil heating system, steam system, pumping system, and left and right safety doors and front and rear...

Purpose: Main application: hydrostatic stretching of metal sheets. Technical Features: The body adopts reinforced frame structure with high strength and rigidity; Proportional servo-control...